Q: What sizes do the vitreous glass tile come in? A: Currently the vitreous comes in one size that is 3/4" x 3/4". The sheet size is roughly 13" x 13" and these mosaic glass tiles are sold per sheet.
Q: Can the vitreous Mosaics be used for the floor? A: The vitreous glass is perfect for the bathroom floors, pool tile, bathroom and kitchens backsplashes as well as spa's and more.
Q: How do I install these tiles? A: The Vitreous Tiles come paper faced. You simply use a modified thinset, place the paper facing out, the bumps or ridges towards the wall, once set, use a wet sponge to soak the paper and let sit for 3 minutes. Once the paper has been soaked the paper will peel right off the tiles. Then using an unsanded grout, fill in the grout joints and your tiles are installed.
Q: Do you have sample pictures of the tiles installed? A: Yes we do in the customer project section of this web site.
Q: Can these tiles be used for the entire pool walls? A: Yes the vitreous glass mosaic tiles are typically used for either the water line of a pool or the entire pool wall.
Q: Is there a specific thinset or mastic I should use? A: Yes for all glass tile it is recommended that you use a modified laytex thinset.
Q: Does the tile have to be sealed if it is used in a pool? A: It is recommended that you finish with a sealer when installing in the pool.
Q: How do I cut the Vitreous Tiles? A: You can cut these tiles with a hand scoring and cutting tool available to purchase just call us at 1-800-497-6827, or you can use a wet saw, you must use a glass cutting diamond blade with your wet saw.
Q: Do you have a store front so that I can see the vitreous tiles? A: We do not have a show room all of what we do is over the internet however, we do offer samples please visit our glass tile sample page.
